Laser Cutter
- Owner/Loaner: On Loan from the good people at BuildYourCNC.com
- Serial Number: Serial Number
- Make/Model: Make/Model of equipment
- Arrival Date: When mid 2015
- Usability: {{{usagerestrictions}}}
- Contact: info@theMakerStation.com
- Where: Back shop near the roll up door
Contents
Info
General Description space...
General Specs
- x
- y
- z
Permissions
- Restricted Access - TRAINING REQUIRED
- Treat equipment as if it were your own and put away as or better than you found it.
Restrictions
- DO NOT cut material containing chlorine atoms or molecules
- How to test unknown plastics to see if they contain chlorine: https://vimeo.com/1615418
Basic Instructions
Add instuctions, lists, links, videos as needed here
Advanced Operational Knowledge
There are some more advanced tasks that not everyone needs to know to do XXXXX, but needs to know to troubleshoot:
- Autodesk Fusion laser Cutter(Water jet mode) primer: http://fusion360.autodesk.com/learning/learning.html?guid=GUID-C14B9F20-3A39-4930-971E-BDFE268384B9
Warnings
- Keep loose hair and sleeves away from all moving parts.
- Beware of hot parts.
- Beware of dust, fumes, choking hazards.
Safety
FILL THIS OUT THOROUGHLY
- x
- y.
File:Warning-laser-6402-300x200.png
References
- links as needed
