Difference between revisions of "Chop Saw"
Line 2: | Line 2: | ||
|owner=The Maker Station | |owner=The Maker Station | ||
|serial=023813 2008 11-49 | |serial=023813 2008 11-49 | ||
− | |model=Dewalt DW715 Compound Miter Saw | + | |model=Dewalt DW715 12" Compound Miter Saw |
|arrived=Apr 1, 2015 | |arrived=Apr 1, 2015 | ||
|doesitwork=Working | |doesitwork=Working | ||
Line 13: | Line 13: | ||
* Do not remove the blade guard. | * Do not remove the blade guard. | ||
* Ask for help if you have never used a chop saw before. | * Ask for help if you have never used a chop saw before. | ||
+ | |||
+ | '''General Specs''' | ||
+ | * 12" Compound Miter Saw (chop saw) | ||
+ | * Type 2 | ||
+ | * 120 VAC~ 15A | ||
+ | * Double Insulated | ||
+ | |||
+ | |||
+ | == Permissions == | ||
+ | * For general use by members. | ||
+ | * Treat equipment as if it were your own and put away as or better than you found it. | ||
+ | |||
+ | == Restrictions == | ||
+ | |||
+ | * Safety Glasses and hearing protection required | ||
+ | * Remove any nails and metal objects from wood prior to cutting | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | [[File:LulzBot_mini_poster.JPG|400px|right]] | ||
+ | == Basic Instructions == | ||
+ | * pending | ||
+ | |||
+ | |||
+ | == Warnings == | ||
+ | |||
+ | * Keep loose hair and sleeves away from all moving parts. | ||
+ | * Print nozzle/extruder operating temperature range is 180-300°C (356-572°F).300°C | ||
+ | * Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old. | ||
+ | * Build plate is glass, take care not to scratch it | ||
+ | |||
+ | |||
+ | |||
+ | == Safety == | ||
+ | |||
+ | * Keep loose hair and sleeves away from all moving parts. | ||
+ | * Do not touch the blade while the saw is plugged in/energized. | ||
+ | * Wear safety glasses | ||
+ | * Wear hearing protection | ||
+ | |||
+ | == References == | ||
+ | * http |
Revision as of 14:45, 3 April 2015
- Owner/Loaner: The Maker Station
- Serial Number: 023813 2008 11-49
- Make/Model: Dewalt DW715 12" Compound Miter Saw
- Arrival Date: Apr 1, 2015
- Usability: {{{usagerestrictions}}}
- Contact: info@themakerstation.com
- Where: Wood working zone
Info
- Use appropriate blade for material being cut.
- Do not remove the blade guard.
- Ask for help if you have never used a chop saw before.
General Specs
- 12" Compound Miter Saw (chop saw)
- Type 2
- 120 VAC~ 15A
- Double Insulated
Permissions
- For general use by members.
- Treat equipment as if it were your own and put away as or better than you found it.
Restrictions
- Safety Glasses and hearing protection required
- Remove any nails and metal objects from wood prior to cutting
Basic Instructions
- pending
Warnings
- Keep loose hair and sleeves away from all moving parts.
- Print nozzle/extruder operating temperature range is 180-300°C (356-572°F).300°C
- Some printed parts may present a CHOKING HAZARD or may be SHARP; not for children under 3 years old.
- Build plate is glass, take care not to scratch it
Safety
- Keep loose hair and sleeves away from all moving parts.
- Do not touch the blade while the saw is plugged in/energized.
- Wear safety glasses
- Wear hearing protection
References
- http